| 機器尺寸(L x W x H) | 506 mm x 398.7 mm x 261 mm (19.92 in x 15.70 in x 10.28 in) |
| 機器重量 | 23.5 kg |
| 最大/最小紙張寬度 | 114/20 mm (4.5/0.79 in) |
| 最小紙張長度 | •Tear-Off Mode: 3.0 mm (0.12 in) •Self-Strip Mode: 12.7 mm (0.5 in) •Rewind Mode: 6.0 mm (0.24 in) |
| 紙張厚度 | 3 mil to 10 mil |
| 碳帶寬度 | 80 mm (3.15 in) |
| 碳帶芯尺寸 | 25 mm (1 in) |
| 最大/最小碳帶寬度 | 110/51 mm (4.33/2.0 in) |
| 碳帶長度 | 450 m (1,476 ft) |
| 打印模式 | 熱感 / 熱轉印 |
| 檢測分辨率 | 600 dpi |
| 最高打印速度 | 25–150 mm/s (1–6 ips) |
| 檢測最高速度 | 150 mm/s (6 ips) |
| 打印寬度 | 105.6 mm (4.16 in) |
| 檢測最大長度 | 304.8 mm (12 in) |
| 最大無效長度 | •Batch Print: 152.4 mm (6 in) •On Demand Mode: 304.8 mm (12 in) |
| 最大條形碼數量 | per Label: 32 |
| 檢測報告 | Statistics and detailed reporting is available through printer web page, USB thumb drive, Verifier Integration Interface (VII), or FTP/SFTP |
| 操作溫度 | +5°C to +40°C |
| 儲存溫度 | -20°C to +60°C |
| 操作濕度 | 20% to 85% non-condensing |
| 儲存濕度 |
| 内存 | 256 MB Flash memory 1 GB DDR3 SDRAM Multi-GB USB memory device (FAT16/FAT32) |
| 紙張傳感器 | Gap, black mark, tag, hole, notch, or continuous |
| 通訊接口 | •USB 2.0 Host (x2) •USB 2.0 Device •Ethernet 10/100 Mbps •RS-232, up to 115.2 KB/s •Bluetooth LE (for Print Set MC only) •Static NFC tag (Bluetooth MAC address) |
| 顯示 | On Color Touch LCD and Web Interface |
| 程序語言 | •Fingerprint (FP) •Direct Protocol (DP) •Intermec Printer Language (IPL) support on 203 dpi and 300 dpi only ZSim2 (ZPL-II) DPL XML-enabled for SAP® AII and Oracle® WMS |
| 檢測條形碼種類 | •Linear (1D) barcode verification conforming to ISO/IEC 15416-2016 •2-Dimensional (2D) barcode verification conforming to ISO/IEC 15415- 2011; Read/No Read Barcode verification |
| 檢測最小(1維)條形碼寬度 | 10 mils (0.254 mm) |
| 檢測最小(2維)條形碼寬度 | 10 mils (0.254 mm) |
| 電源 | 200 watt rated power supply with PFC , 50 - 60Hz |
| 選購配件 | •Verifier Calibration Card (applicable to PX940 Verifier Version only) •Wireless Board (IEEE 802.11 a/b/g/n/ac) •Parallel Board (IEEE 1284) •Applicator Interface Board •Industrial Interface Board •Peel Off module (factory configurable) •Rewinder module (factory configurable) •1.5 in non-collapsible inner core diameter on media supply and rewinder take-up (factory configurable) |
